CFJSX - SYNTHETIC GLOSS ENAMEL #17875 WHITE
- MSDS: CFJSX
- Manufacturer: FARWEST PAINT MFG CO
- Product Name: SYNTHETIC GLOSS ENAMEL #17875 WHITE
- National Stock Number: 8010-00-598-5052
Product Identification
Product ID:SYNTHETIC GLOSS ENAMEL #17875 WHITE
MSDS Date:03/18/1996
FSC:8010
NIIN:00-598-5052
MSDS Number: CFJSX
Responsible Party
SEATTLE, WA 98168-3251
US
Emergency Phone: 206-244-8844
Info Phone: 206-244-8844
Cage: 6F266
Contractor
Telephone: 206-244-8844
Cage: 6F266
Ingredients
MINERAL SPIRITS 350
CAS: 8032-32-4
RTECS: OI6180000
Fraction By Weight: 34.0%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM
MINERAL SPIRITS 250
CAS: 64742-89-8
Fraction By Weight: 9.0%
OSHA PEL 250 PPM
ACGIH TLV: 250 PPM
VOC = 457 G/L
RTECS: 9999999VO
OSHA PEL NOT RELEVANT
ACGIH TLV: NOT RELEVANT
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: IRRITATION, SENSITIZATION,
DEFATTING. INHAL: HEADACHE, DIZZINESS, NAUSEA, UNCONSCIOUSNESS,
BRAIN/NERVOUS SYSTEM DAMAGE. EYE: IRRITATION.
Medical Cond Aggravated by Exposure:NONE
First Aid
First Aid:SKIN: IMMED WASH W/SOAP & WATER. REMOVE CONTAM CLOTHES. WASH
BEFORE REUSE. EYES: FLUSH W/LARGE AMOUNTS OF WATER FOR 15 MINUTES,
GET MED AID. INGEST: DONT INDUCE VOMIT. KEEP PERSON WARM/QUIET, GET
MED AID. INHAL: REMOVE TO FRESH AIR, GET IMMED MED AID.
Fire Fighting
Flash Point Method:TCC
Flash Point:26.0F,-3.3C
Lower Limits:0.7
Extinguishing Media:FOAM, CO2, DRY CHEMICAL, WATER FOG. ANY CLASS B
FIRE EXTINGUISHING AGENT. WATER MAY BE UNSUITABLE.
Fire Fighting Procedures:USE SCBA, EVAC AREA. WEAR PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:VAPORS MAY FORM EXPLOSIVE MIXTURES W/AIR,
BE IGNITED. CLOSED CONTAINER MAY EXPLODE W/EXTREME HEAT.
Accidental Release
Spill Release Procedures:ELIMINATE IGNITS. VENT AREA. ABSORB.
CONTAINERIZE. LARGE SPILL: DIKE, USE PROTECTIVE EQUIPMENT DURING
CLEANUP.
Handling
Handling and Storage Precautions:KEEP AWAY FROM IGNITS. DONT WELD ON
FULL/EMPTY CONTAINER. KEEP CONTAINER CLOSED WHEN NOT IN USE &
PROPERLY LABELED.
Exposure Controls
Respiratory Protection:CANISTER TYPE RESPIRATOR.
Ventilation:GENERAL VENTILATION. LOCAL MAY BE REQUIRED DURING CERTAIN
OPERATIONS.
Protective Gloves:NITRILE, NEOPRENE, RUBBER.
Eye Protection:CHEMICAL GOGGLES OR FACE SHIELD.
Other Protective Equipment:PROTECTIVE CLOTHING, EYEWASH STATION, SAFETY
SHOWER.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
NK
Chemical Properties
Boiling Pt:B.P. Text:205 TO 387F
Vapor Pres:53.0
Vapor Density:>AIR
Evaporation Rate & Reference:
Appearance and Odor:THIN WHITE LIQUID, W/COLOR OF TINT.
Percent Volatiles by Volume:59.0
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS, ACIDS, BASES & EPOXY HARDENERS UNDER UNCONTROLLED
CONDITIONS.
Stability Condition to Avoid:IGNITS.
Hazardous Decomposition Products:CARBON MONOXIDE & TOXIC VAPORS.
Disposal
Waste Disposal Methods:IN ACCORDANCE W/FEDERAL/STATE/LOCAL REGULATIONS.
EPA D-001.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.